maXtractor extractor bag set of 3 3.8L

Discover the maXtractor extractor bag set, consisting of three high-quality bags with a capacity of
3.8 liters each and different micron sizes (25 µ, 73 µ and 190 µ) to optimize your extraction process.

With the maXtractor extractor bag set, you can easily extract plant parts such as flowers or petals using the ice-water process (Ice-O-Lator) to obtain high-quality resins.

To make Isolator Hash yourself, you will need some basic utensils:
two buckets, a spatula, an electric hand mixer, 2 to 5 kg of ice cubes, kitchen towels for later water absorption and the MaxTractor sieve bags.

The application:
1. First, plant parts such as buds and cuttings are placed in a bucket of ice-cold water and the ice cubes are added.
The low temperature causes the extraction glands to detach from the plant materials and become sieveable.
The mixture is then stirred with a mixer for 10-30 minutes, with breaks in between.
It is then cooled for 15-30 minutes, with ice being added if necessary.

2. The MaxTractor sieve bags are placed in the second bucket, starting with the finest sieve and then the coarser one, leaving sufficient space between the bags.
The previously prepared water-plant mixture is filled into the sieve bags.
If not all of the plant material is covered with water, additional water is added. The crystals will now sink and collect in the fine sieve.

3. Next, remove the coarse sieve with the plant residues, swirling and squeezing gently.
The fine sieve bags are then removed and the water is pressed out (if necessary, press further using a kitchen towel placed around the sieve bag).
A brown-green sludge remains in the bag, which is scraped off the bottom of the sieve with a spatula and then laid out to dry.

The finer the sieve, the lower the yield, but the result will be stronger.